Labels HomeOur CredentialsPrint Info Web FormPayment DetailsDelivery & PackagingDelivery OptionsLabelling Do's & Don'tsPostal DelaysReturns PolicyRecycling/SustainabilityContact Information

Here is an Example of the Ideal and Correct Positioning of Your Labels
on ALL of your Mail from Small Envelopes to Large Parcels

CompleteMailPack_V1.jpg

OBA CODES: STL / BPL / BPR : You Need 1st and 2nd PPI Images
---------------
OBA CODE : CRL : You Need 24 and 48 PPI Images
---------------
OBA CODE : OLA : You Need 1st PPI Image (Del By RM Not Required)
---------------
Using Signed For with STL/BPL/BPR : You Need 1st and 2nd PPI Images
---------------
Using Signed For with CRL : You Need Signed For 24 and Signed For 48 PPI Images
---------------
Special Delivery 9am & 1pm : You Need SD9am and SD1pm PPI Image



Here are a few Do's & Don'ts when affixing your Labels
 
All of our Labels are made with Permanent Adhesive
The adhesive will affix to most Card & Paper Packaging Stock
 
Our Labels will also affix to most Polythene Stock - such as Polybags
but special considerations should be noted, as below :-
 
DO - Store your packaging and labels ideally at room temperature
 
DO - Apply very firm pressure to the label, ensuring all corners & edges
are firmly seated - especially on polythene or polybags
 
DON'T - Affix any form of Adhesive Tape ONTO ROLL LABELS
this will cause a reaction to the print and make it fade !

DON'T - Let your stock get cold or damp - this will negatively affect adhesion

DON'T - Allow dust to get onto your packaging or polythene - as this
acts as a barrier between the label and your packaging
and will limit the effectiveness of the adhesive
 
The above guidelines apply to ALL LABELS, no matter where you buy them from !




Our Complete Label Packs Can Make Ordering Easier For You - And Cheaper Too !